AlproJet-DD |Daily Cleaning & Disinfection For Dental Suction System (Aspirator) And Spittoon Bowl

Daily Maintenance of Dental Aspiration systems and Spittoon bowl

AlproJet-DD is a concentrated liquid .

All dental suction and Vacuum Aspiration systems With or without Amalgam separator.

It Cleans, Disinfects and Deodorizes

---

It is compatible with all materials .

It is Foam-free cleaning concentrate liquid for all types of suction system and amalgam separator

---

Efficacy :

• bactericidal
• yeasticidal
• virus-inactivating 
• Dissolves biofilm and prevents formation of sludge through blood and proteins
• The solution for contaminated suction systems – provides reliable protection against infection
• certified by VAH (Association for Applied Hygiene) /DGHM (German Society for Hygiene and Micro- biology), meets the DGHM requirements and EN-standards for the disinfection of instruments
•  Recommended by leading equipment manufacturers because  , It has Certified material compatibility .

---

Features :

• Aldehyde-free ,chlorine-free and phenol-free
• Foaming  Free and cleaning disinfectant concentrate based on quaternary ammonium salts.
•  High dirt-dissolving power towards deposits , saliva residues and drilling dusts.
• Good material compatibility.
• Even very low concentrations are sufficient to achieve rapid effectiveness.
• Clean , Disinfect and Deodorize
• Environmentally friendly.
• Pleasant odor
• Highly effective and fast at low concentrations.
• Low application concentration (5%)
• Highly intensive cleaning effect against deposits and sludge

Application For Dental Suction System :

For the reliable cleaning, disinfection and care it is recommended that  For one application , you should use 2 Liter  of a 5 % solution  .

• Prepare 2 liter of Alprojet-DD  5 % solution  to be ready for use .
• We Recommend the suction of Ready To Use Solution of 1 liter per treatment unit .
• The Spittoon Bowel Must be disinfected with at least 250ml solution .

For 1 liter preparation ( 50 ml From Alprojet-DD + 950 ML warm water )

• Alprojet-DD is used  1 – 2  times  per day (at noon and in the evening).
• Let take effect for at least 10-30 minutes .
• The disinfectant solution of  Alprojet-DD can remain in the system until the next restart of the assembly .

Rinse aspiration tubes and spittoon bowl thoroughly with water just before starting to work.
Please follow the manufacturer‘s instructions as .

We Recommend Rinsing the system with  at least 2 liter cold water prior to the first patient and following the expiry of the exposure time .

Spittoon Bowl can be cleaned and disinfected  with other Surface disinfectant  solution or wipes ( Minuten wipes or PlastiSept Wipes  OR Alprocleaner solution )