
The Philips HeartStart HS1 is designed for the ordinary person in the extraordinary moment. Philips HeartStart HS1 defibrillator acts as your personal coach to guide you through the process of treating a victim of suspected sudden cardiac arrest. The HeartStart HS1 AED provides real-time guidance through simple, step-by-step voice commands and CPR coaching.

Features
Ready to act. Ready to go.
HS1 is virtually ready to go the moment it arrives. With the Ready-Pack configuration, the HS1 AED is positioned inside the carry case, with Adult SMART Pads Cartridge and battery already installed and with a spare Adult SMART pads cartridge in place. Just pull the green tab to launch the initial self-test and press the green On/Off button, which activates voice instructions and visual icons.

Specifications
| Type | 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells |
|---|---|
| Capacity | Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003) |
| Install-by Date | Battery is labeled with an install-by date of at least five years from date of manufacture |
| Standby Life | Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) |
| Kit Contents | Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner’s manual, quick reference guide |
|---|---|
| Waveform | SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance |
| Defibrillation peak current – Adult | 32 A (150 J nominal) into a 50 ohm load |
| Defibrillation peak current – Pediatric | 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge) |
| Quick Shock | Able to deliver a shock after the end of a CPR interval, typically in eight seconds |
| Shock-to-Shock Cycle Time | Typically less than 20 seconds between shocks in a series |
| Voice Instructions | Detailed voice messages guide responder through use of the defibrillator |
| CPR Guidance | Instructions for adult and infant/child CPR available at user selection |
| Shock Delivery | Via adhesive pads placed on patient’s bare skin as illustrated on pads |
| Controls | Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button |
| Indicators | Ready light, blue i-button, caution light |

| Energy delivered | Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load |
|---|---|
| How Supplied | Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution |
| Active Surface Area | 85 cm² (13.2 in²) each |
| Cable Length | Adult pads: 137 cm (54″); Infant/Child pads: 102 cm (40″) |
| Use-by Date | Cartridge is labeled with a use-by date of at least two years from date of manufacture |
| Training pads (optional) | Special pads put HeartStart into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins |

| Daily Automatic Self-tests | Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity |
|---|---|
| Pads Integrity Test | Specifically tests readiness-for-use of pads (gel moisture) |
| Battery Insertion Test | Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness |
| Status Indicator | Blinking green “Ready” light indicates ready for use. Audible “chirp” indicates need for maintenance |

| Sealing | Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1 |
|---|---|
| Operating Temperature | 0 – 50 °C (32 – 122 °F) |
| Operating Altitude | 0 to 4,500 m (0 to 15,000 ft) |
| Standby Temperature | 0 – 43 °C (32 – 109 °F) |
| Operating Humidity | 0 to 95 % relative humidity (non-condensing) |
| Shock/Drop Abuse Tolerance | Withstands 1 meter drop to any edge, corner, or surface |
| Standby Humidity | 0 to 75 % relative humidity (non-condensing) |
| Vibration | Meets EN1789 random and swept sine, road ambulance specification in operating and standby states |
| Standby Altitude | > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft |
| EMI (Radiated/Immunity) | Meets EN55011 Group 1 Level B Class B and EN61000-4-3 |

| Infrared | Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol |
|---|---|
| Data Stored | First 15 minutes of ECG and the entire incident’s events and analysis decisions |





































